Directory: All Listings 

Results 221 - 240 of 261 This Category
All Listings
SkySensor2000PC
0 reviews

Features This driver supports the SkySensor2000PC telescope contoller using the LX200 compatible protocol. The driver is similar to the LX200 driver but the features that are not supported by the SkySensor2000PC have been removed. There are no extra feat ...
Read More...

Category Mounts
0 reviews

Read More...

Category Mounts
SynScan Legacy
0 reviews

Read More...

Category Mounts
Takahashi Temma
0 reviews

  Features The driver supports Takahashi Temma mounts. Basic functions such as Track, Sync, and Park are supported. Select Temma Takahasi from your client. For example, if using Ekos, you can select the driver from telescope dropdown in the Profile ...
Read More...

Category Mounts
TeenAstro Mount
0 reviews

Features The INDI TeenAstro driver interacts with a mount controller using the LX200 protocol through a serial link. The TeenAstro mount controller can be used with many different mounts that use stepper motors, including SkyWatcher, Astro-Physics and ...
Read More...

Category Mounts
LX200 GPS
0 reviews

Features The lx200gps supports many extended features over the conventional Autostar based telescope. The lx200gps driver specfically supports: GPS Power Control. GPS Status (Sleep, Wakeup, Restart). GPS System Update. Syncing client with GPS time ...
Read More...

Category Meade
Autostar
0 reviews

Features Do not use this driver with LX200 Classic telescope as it uses a seperate driver. Even though you can use this driver to control LX200 GPS or LX200 16" telescopes, you won't be able to use the extra features provided by these devices Operation ...
Read More...

Category Meade
LX200 16
0 reviews

Features TODO Operation TODO
Read More...

Category Meade
LX200 Classic
0 reviews

Features The lx200classic supports functions that were removed with the introduction of Autostar: Ability to read object name from controller. Setting Max Slew Rate. Setting Maximum and Minimum Slew Limtits. Support for all library commands (lookup ...
Read More...

Category Meade
Celestron AUX
0 reviews

INDI Celestron AUX Driver is released with INDI Library >= v1.9.4 BETA driver. Do not use unattended. For Alt-Az mode, you must adjust the PID parameters to achieve good tracking. This driver was not fully tested with an Equatorial mount. Use caution. ...
Read More...

Category Celestron
Celestron NexStar Evolution
0 reviews

  Features The Celestron Nextstar supports all GOTO and sky alignment functions of NexStar Evolution telescopes. In principle it should support any Celestron scope using AUX command set (most of them) with SkyFi wireless module. It was never tested ...
Read More...

Category Celestron
Celestron NexStar
0 reviews

Included with libindi v1.6+. Features This driver supports Celestron telescopes using the NexStar protocol. The following models use this protocol: NexStar GPS NexStar GPS-SA NexStar iSeries NexStar SE Series NexStar GT Advanced GT CGE mo ...
Read More...

Category Celestron
SkyWatcher Synscan
0 reviews

Features The driver can control any mount controllable by Synscan hand controller, it offers basic GoTo capability and parking. Current features are: Slew & Sync Slew Rates Sidereal, lunar, solar and custom trackrates Full joystick support ...
Read More...

Category Orion
CEM120
0 reviews

INDI iOptron CEM120 Driver is released as a 3rd party driver and requires INDI Library >= v1.6.5. Features This INDI driver is not limited to CEM120 as it supports the following iOptron mounts: CEM120-EC2 with firmware 20171001 and later CEM120- ...
Read More...

Category IOptron
GotoNova Upgrade Kit 8400
0 reviews

  Features The driver supports the following Gotonova 8400 based controllers Functions such as Track, Sync (Regular and CMR), and Park are supported. Operation On connection, the mount retrieves the controller time and location and updates the c ...
Read More...

Category IOptron
IEQPro/CEM60
0 reviews

  Features The driver supports the following iEQ mounts: CEM60 (Firmware 140807 and later)CEM60-EC (Firmware 140807 and later)iEQ45 Pro (Firmware 140807 and later)iEQ45 Pro AA (Firmware 140807 and later) Functions such as Track, Sync, Guiding, Ho ...
Read More...

Category IOptron
ZEQ25/SmartEQ
0 reviews

Features The driver supports the following mounts: ZEQ 25 SmartEQ iEQ30 iEQ45 EQ/AA Functions such as Track, Sync, and Park are supported. Operation On connection, the mount retrieves the controller time and location and updates the client acc ...
Read More...

Category IOptron
Astrophysics Experimental
0 reviews

Features This driver supports Astro-Physics mounts over a serial connection with a firmware version of 'V' or newer. Current features of the driver: Goto/Slew  Sidereal, lunar, solar and custom track rates PEM control (ON/OFF) Custom pa ...
Read More...

Category Astrophysics