Features
Both the Armadillo and Platypus are advanced programmable controllers that can drive many different motors, attached to a variety of focusers. With this driver you can automate your focusing in a very accurate and customizable way, being able ...
Read More...
Features
There are no extra features for this driver.
Operation
It only works with firmware versions 1.19 and higher, because needs to support ACK command. However version 1.25 is recommended because there are some bugs in LX200 protocol in previous ve ...
Read More...
AstroArch is a 64bit OS that works on Raspberry 3/4. It packages all INDI drivers and tries to stay always up to date with the latest INDI and Kstars releases. Based on ArchLinuxARM it's not your everyday raspbian but it's thought to be as user friendly a ...
Read More...
Features
Astroberry Focuser is an Open Source Software. It provides a stepper motor driver for Raspberry Pi with absolute and relative position capabilities.
Supports DRV8834 and A4988 stepper controllers
Absolute and relative position control
Stand ...
Read More...
Astroberry Server is a ready to use system for Raspberry Pi for controlling all your astronomy equipment. It handles all astronomy equipment supported by INDI server.
Features
Astroberry Server features:
Raspbian Buster Desktop
Support for Raspbe ...
Read More...
Features
Astrolink4 INDI driver supports AstroLink 4 mini device. AstroLink 4.0 mini device was designed to make astroimaging easier. Contains two focuser controllers, regulated outputs for heaters, peltiers or fans, switchable power outputs, different s ...
Read More...
Features
Astrolink4 INDI driver supports AstroLink 4 mini device. AstroLink 4.0 mini device was designed to make astroimaging easier. Contains two focuser controllers, regulated outputs for heaters, peltiers or fans, switchable power outputs, different s ...
Read More...
Features
The Astromechanics Canon Lens Controller is a Canon EF/EF-S compatible solution for external iris & focus drive. Tamron, Samyang, and Sigma lenses are also supported. It features :
GOTO function (absolute position) and relative positio ...
Read More...
Features
The Astromechanics Light Pollution Meter is a handheld / PC based monitoring tool to measure sky brightness in mag/arcsec2. Measurements are compatible with Unihedrons Sky Quality Meter (SQM). It features :
Measure sky brightness in mag/arcs ...
Read More...
Features
This driver supports Astro-Physics mounts over a serial connection with a firmware version of 'V' or newer.
Current features of the driver:
Goto/Slew
Sidereal, lunar, solar and custom track rates
PEM control (ON/OFF)
Custom pa ...
Read More...
Features
This driver supports Astro-Physics mounts with GTOCP2 controller (Firmware version E or later) over a serial connection.
Current features of the driver:
Goto/Slew
Sidereal, lunar, solar and custom track rates
PEM control (ON/OF ...
Read More...
Features
This driver supports older Astro-Physics mounts (GTOCP2 or before). It can work for later mount models, but for such models, it's better to use other drivers with more functionality.
Current features of the driver:
Goto/Slew
Sid ...
Read More...
Features
This driver supports Astro-Physics mounts over a serial connection with a firmware version of 'V' or newer.
This driver is a re-write of the previous "experimental" driver. It was written with the aim of full automation using Ekos. It is a new ...
Read More...
The script is meant to automate the many setup steps involved with configuring a Raspberry Pi 3 so that it can be an Astrophotography hub using INDI, KStars, and Ekos.
Read More...
Features
This INDI Astrotrac driver interacts with Astrotrac mounts via WiFi. It fully supports all the mount features and provides support for a mount model powered by INDI Alignment Subsystem. This results in highly accurate GOTOs when used with a plat ...
Read More...