Guide limits



Guide limit settings are applicable to all the images in the sequence queue. When a limit is exceeded, Ekos shall command the appropriate action to remedy the situation as explained below.

  1. Only start Guiding Deviation: Start capturing only if guide deviation is below the given threshold (ignored for previews)
  2. Only start Guiding Deviation Value
  3. Guide Deviation: Abort sequence if guiding deviation exceed this value N consecutive times
  4. Guide Deviation Value
  5. Consecutive times: Abort sequence if guiding deviation exceed this value N consecutive times
  6. Dither per Job: If global dither is enabled, then dither every N number of frames for this job, Set to 0 to use global dither frequency.